 |
Trade
|
Specified-Lengths Policy for Mon Reale®, Embossed & Traditional Mouldings
White River™ hardwood mouldings are produced from lumber that is 65% 12'-16' lengths, allowing us to produce stock mouldings in long lengths (overall 3'-16'). Our hardwood mouldings are precision machined with Weinig Moulders using Weinig Knife Tooling.
There is an upcharge for specified lengths. The customer also pays for additional footage (overpull) needed to pull specified length. Upcharges by category are shown at right. It is not our policy to run specified lengths on stock items when there is standing inventory. Customers will be notified if a specified length is not available so that they can match their orders to current available lengths.
| Category | 3' - 14' | 15' - 16' |
|---|---|---|
| Traditional | 20% | 30% |
| Embossed | 20% | 30% |
| Mon Reale | 30% | 40% |
* Adornments Lineals are 10% when specifying all 8' lengths only
Adornments™ Hand-Carved Lineals - Produced from 8' FAS Lumber with minimal dime-size knots; lengths are end trimmed to 96" - 97".
Adornments™ Traditional Moulding - These are moulder produced, without carving or decorative enhancements. (i.e. Maple & Cherry: MLD5868, MLD5974). These mouldings are produced from 8' FAS Hardwoods with minimal cut-backs. 7' 9" + is tallied as 8'. Any order over 8 pieces may include 2 pieces that equal 8' (4'+4', 3'+5'). Requesting all 8' pieces is subject to a 10% upcharge.
NOTE: How Distributors handle specified lengths from their inventory is their policy.
15' & 16' Policy for Mon Reale®, Ornamentally Embossed™ & Traditional Mouldings
Because 15' - 16' lengths are considered premium, there is a 30% upcharge (40% upcharge on Mon Reale®). These will be keyed in under a separate line item. Specified lengths are subject to that length being available in current inventory. We do not set up and run specified lengths when we have standing inventory. Processing specified-length orders requires opening bundles to pull those lengths. If lengths are not available, we pull the longer lengths required to fill the order. The moulding is then tallied and bundled for shipping. The extra moulding that has been pulled has to be retallied, bundled and restocked. This is a time-consuming process. Our standard 30% (40% Mon Reale®) upcharge is enough to cover the labor to reasonably pull the desired lengths, not to cover the additional footage needed to get the order. A reasonable attempt will be made to pull the order to desired lengths, but overages of an additional 10-20% may occur. If extra footage exceeds 20%, we will call for approval.
Back to Support